Feedthroughs

FC Series PBF (Permanent Bulkhead Feedthrough)—Features/Specifications
Common to all FC Permanent Bulkhead Feedthroughs (PBF)

  • Ferrules—Precision machined zirconia
  • Body Material—316 series stainless steel
  • Universal threaded coupling
  • Supports single and multi-mode fiber
  • Typical light loss < 1dB
  • 500 Mate/Demated cycles
  • Operating Temperature: -40°F to 185°F (-40°C to 85°C) with 0.5dB maximum insertion loss
  • Waterproof—100% leak tested
  • Pressure—1000 psig pressure with no signs of leakage
  • Hermetically sealed with or without connector attached, with no detectable leaks at 1×10-9 cc of helium / sec with a permeability rate of 1 X 10-7 cc of helium/sec.

Specific—Features/Specifications

  • FC-DRY™ HP PBF Short
    – Minimum Bulkhead Thickness – .125 in
    – Maximum Bulkhead Thickness – .395 in
  • FC-DRY™ HP PBF
    – Minimum Bulkhead Thickness – .125 in
    – Maximum Bulkhead Thickness – 1.000 in
  • FC-DRY™ HP PBF Right Angle
    – Minimum Bulkhead Thickness – .125 in
    – Maximum Bulkhead Thickness – .550 in

Specification Download

FC Dry-HP Feedthrough

ST Series PBF (Permanent Bulkhead Feedthrough)—Features/Specifications
Common to all FC Permanent Bulkhead Feedthroughs (PBF)

  • FerrulesPrecision machined zirconia
  • Body Material316 series stainless steel
  • Supports single and multi-mode fiber
  • Typical light loss < 1dB
  • 500 mate/demated cycles
  • Operating temperature: -40°F to 185°F
    (-40°C to 85°C) with 0.5dB maximum insertion loss
  • Waterproof100% leak tested
  • Pressure1000 psig pressure with no signs of leakage
  • Hermetically sealed with or without connector attached, with no detectable leaks at 1×10-9 cc of helium / sec with a permeability rate of 1 X 10-7 cc of helium/sec.

Specific—Features/Specifications

  • ST-DRY® HP PBF Short
    – Minimum Bulkhead Thickness – .125 in
    – Maximum Bulkhead Thickness – .500 in
  • ST-DRY® HP PBF
    – Minimum Bulkhead Thickness – .125 in
    – Maximum Bulkhead Thickness – 1.125 in
  • ST-DRY® HP PBF Right Angle
    – Minimum Bulkhead Thickness – .125 in
    – Maximum Bulkhead Thickness – .590 in

Specification Download